SPIF260A: Flexible one USB and triple-SATA Storage Controller Platform
The SunplusIT SPIF260A is a flexible high performance, lower power chip design for different storage products.
The SPIF260A has adopted the 32 bit RISC processor running at 100MHz.
The SPIF260A provides USB 2.0 device mode only and 3 Serial ATA ports, which can be programmed to host or device mode.
SPIF260A could be programmed as different applications which provide different product design. SPIF260A also offers standard interface like I2C, UART, SPI and SDIO. Customers could use these interfaces to differentiate products.
Product Feature
SPIF260A is the storage platform that has many special features. These features are programmable to customers to make their own products unique.
» Overall Feature
．
Fabricated in CMOS process with 1.8V for core and SATA PHY, +2.5V for DDR I/Os and 3.3V for other I/Os.
．
Built-in 32 bit RISC to run at 100MHz.
．
Support XOR engine to support RAID implement.
．
Built-in 128KB ROM and 64KB RAM.
．
Support 3 SATA ports to compliance with SATA 2.5 specification. Each SATA port could be programmed as host or device mode.
．
Support one USB 2.0 device port to support bulk mode data transfer.
．
Support SPI interface.
．
Support General Purpose I/Os (GPIO0~GPIO15).
．
Support single DDR up to 200MHz and 512Mb.
．
Support NOR type flash for read only.
» USB Features
．
Compliant with USB 2.0 specifications and pass USB certification.
．
Support USB high speed (480Mbps) and full speed transfer rate (12Mbps).
．
Support Mass Storage Device Class bulk only transfer.
．
Support USB vendor command (Control Endpoint) and SCSI vendor command.
．
Support USB host controller for UHCI, OHCI, EHCI mode.
» Serial-ATA Features
．
Compliant with Serial-ATA 2.5A specifications.
．
Support Serial-ATA generation I and II transfer rate of 1.5Gb/s and 3.0Gb/s.(Gen1i, Gen1m, Gen2i, Gen2m, not include Gen2X.)
．
Support Serial-ATA power saving mode: Partial and Slumber mode.
Storage Solutions
